Setpoints - York YSCD Manual

User Interface Control Center

SETPOINTS

The following procedure is required to change a
Setpoint:
•
From the Run Status screen, use the right arrow
key > to scroll down to Setpoints.
•
When Setpoints is surrounded by brackets, press
the ENTER key.
•
The Password screen will appear (ask startup
technician for password).
File View
BAC
I / O P o i n t s
[ S e t p o i n t s ]
HOME
CANCEL
ENTER
•
In the Password screen, use the INC and DEC
keys to enter your administrator password. Use
the right arrow key > to move the cursor. After
entering the password, press the right arrow key
>.
File View
BAC view
R e q u i r e s A d m i n
P a s s w o r d :
HOME
CANCEL
ENTER
50
3
view
ALARM
INC
DEC
3
[ _ ]
ALARM
INC
DEC
•
Use the right arrow key > to scroll through the
Setpoints.
•
The screen will display brackets [ ] around the
value to be changed.
•
To change a digital setpoint, press the ENTER
key to go into the edit mode.
•
Use the INC or DEC keys to toggle between the
values.
•
Use the ENTER key to accept the new setpoint.
•
To change an analog setpoint, select the ENTER
key to go into the edit mode.
•
Use the INC or DEC key to increase for decrease
the setpoint value.
•
Use the ENTER key to accept the new setpoint.
FORM 145.05-NOM2 (807)
JOHNSON CONTROLS