Formex Snap Lock Chicken Coops Assembly Instructions Manual page 10

Step 12: Slide the two Litter Trays into
place. (Fig. 12)
Step14: Install the Removable Panel by sliding it up, from underneath the Back Wall (Fig.
14a), until the top of the Removable Panel is to the inside of the bottom of the Back Wall (Fig.
14b). Rotate the Removable Panel until it is vertical and the pegs on the bottom of the Removable
Panel are aligned with the holes in the Coop Base (Fig. 14c). Slide the Removable Panel down,
inserting the pegs into the holes, and close the hasp over the hasp eye. (Fig. 14d)
Fig. 14a
Litter Trays, Roosts, & Removable Panel
Fig. 12
Fig. 14b
Step 13: Install the Roosts by seating
them into the recesses found in the Front
and Back Walls. (Fig. 13) What height and
whether or not you want to install all three
roosts depends on your situation.
Fig. 14c
Fig. 13
Fig. 14d