Bluetooth Communication - Hemisphere GPS S320 User Manual

Bluetooth Communication

If you have a Bluetooth-enabled device, such as a data collector, you can wirelessly communicate
with the S320.
When you attempt to connect the S320 to a Bluetooth-enabled device, such as a handheld data
collector, the following S320 Bluetooth information appears on the device:
HGPS S320 XXXXXX
where "XXXXXX" is the Eclipse board serial number
To complete the connection you must use the correct PIN/Passkey, which is 0000. Table 3-6
describes the Bluetooth status LED options.
Table 3-6: Bluetooth LED status
LED Colors
Off
Blue
Blue blinking/pulsing
S320 User Guide
Chapter 3: Setup and Configuration
Meaning
Bluetooth inactive
Active Bluetooth connection
Active Bluetooth connection and
transmitting/receiving data
PN 875-0281-000 Rev C2