Displaying Current Module Status - Hemisphere GPS S320 User Manual

Displaying Current Module Status

The S320 allows you to quickly review the status of each module (UHF/GSM, mode of operation,
Bluetooth, and SD card logging).
To display current module status:
Press the Select button.
The external power status LED is red (the unit is displaying its current status) and the LED of each
module will be either OFF (LED not illuminated, module powered off) or ON (LED illuminated, module
powered on).
Table 3-3 illustrates the colors of the LEDs for each module.
Table 3-3: Module status LED color descriptions
LED
UHF/GSM
GPS and DGPS
position indicators
Bluetooth
SD card logging
For example, in the figure below the UHF radio is on, the unit is in RTK Rover mode, Bluetooth is
active, and SD card logging is on.
S320 User Guide
LED Color
Off
Green
Yellow
Off (both)
GPS Yellow
DGPS None
GPS None
DGPS Green
GPS Yellow
DGPS Green
Off
Blue
Off
Yellow
Chapter 3: Setup and Configuration
S320 Operation
UHF radio and GSM
module both off
UHF radio on
GSM module on
L-band
RTK rover
RTK base
e-Dif
Bluetooth off
Bluetooth on
SD card logging off
SD card logging on
PN 875-0281-000 Rev C2