Tilt Function Control - Hemisphere GPS S320 User Manual

Tilt Function Control

The S320 includes tilt control functionality that allows you to level your unit using five of the LED
indicators. When you activate tilt control you see the changes to the angle of the antenna in real
time (similar to a level).
To activate tilt control functionality:
Press the Power button and the Select button at the same time. The tilt of the unit is
displayed for a period of 1 minute or until you deactivate tilt control functionality.
To deactivate tilt control functionality (return to normal operation):
Press the Power button and the Select button at the same time. When tilt
control functionality is activated:
X-axis tilt is displayed along
three horizontal LEDs
Y-axis tilt is displayed along
three vertical LEDs
Each LED shows a 0.5° tilt
(user-configurable)
Table 3-4 illustrates the colors of the
LEDs depending on the tilt direction of the unit. These LED colors only apply if you have
activated tilt control.
Table 3-4: Tilt control LED colors
LED Colors
S320 User Guide
Middle (right battery) LED is green Unit is level
Left LED is green
Right LED is green
Left LED is green and middle
(right battery) LED is red
Right LED is green and
middle (right battery) LED is
red
Top LED is red
Bottom LED is red
Chapter 3: Setup and Configuration
Meaning
Unit is off level to the left Unit is
off level to the right
Unit is off level to the left by more
than twice the configurable amount
Unit is off level to the right by more
than twice the configurable amount
Unit is tilted backward Unit is
tilted forward
PN 875-0281-000 Rev C2