Operation
unlocking the Yamaha Security System.
For further information, see page 27.
TIP:
If you lost track of the current security
mode, press the lock or unlock button to
reset the security system.
The signal transmission range of the re-
mote control transmitter varies depending
on the mounting position of the receiver. To
operate the Yamaha Security System cor-
rectly, use the transmitter as close as pos-
sible from the receiver.
If Yamaha Security System may not oper-
ate correctly, repeat the activating proce-
dure once again.
2.
Place the remote control lever in " "
(neutral).
67
N
ZMU04588
TIP:
The start-in-gear protection device prevents
the engine from starting except when in neu-
tral.
3.
Attach the engine shut-off cord to a se-
cure place on your clothing, or your arm
or leg. Then install the clip on the other
end of the cord into the engine shut-off
switch.
4.
Turn the main switch to "
ON
ON
OFF
START
OFF
START
ZMU04589
" (on).