Advertisement
Read This Before Operating
DO NOT RETURN THE BIG LEAGUE MACHINE TO THE RETAIL STORE WHERE PURCHASED.
HEATER SPORTS is dedicated to your customer satisfaction. If you experience any trouble with the operation
of the Big League Soft Toss Machine contact us at: (800) 492-9334 or go to our website at
www.HeaterSports.com.
Heater Sports recommends using any Heater Sports lite or real baseballs in your Big League Pro Machine. In
addition, you can use regulation baseballs, and any other 9" ball.
WARNING: THIS PRODUCT IS TO BE USED BY ADULTS ONLY. MAKE SURE MACHINE IS TURNED OFF BEFORE
ASSEMBLY! KEEP HANDS AND ALL BODY PARTS AWAY FROM BALL ENTRY AND EXIT! SERIOUS INJURY MAY
OCCUR IF USED INCORRECTLY!
• Please be sure to read all of the instructions before using the Big League Soft Toss Machine
to ensure the machine is working properly.
• Parents: Your child should be made aware of potential dangers when using any electrical
powered product.
• Never put your fingers into the Big League while it is operating.
• The Big League is not a toy and an adult should supervise children. It is very important
that the batter make sure the area is clear before swinging bat.
• Stay clear of the ball opening while the Big League is operating.
Children should be advised of any danger and appropriate precautions should be taken.
Model# ST49
IMPORTANT
CALL TOLL FREE: (800) 492-9334.
CUSTOMER SERVICE
BIG LEAGUE BALL RECOMMENDATION
95 West 650 South • St. George, Utah 84770
PH: 800-492-9334 • PH: 435-656-1756
Fax: 435-688-0741
1
Advertisement
Table of Contents
Related Manuals for Heater Sports Big League Pro
Summary of Contents for Heater Sports Big League Pro
- Page 1 BIG LEAGUE BALL RECOMMENDATION Heater Sports recommends using any Heater Sports lite or real baseballs in your Big League Pro Machine. In addition, you can use regulation baseballs, and any other 9" ball. WARNING: THIS PRODUCT IS TO BE USED BY ADULTS ONLY. MAKE SURE MACHINE IS TURNED OFF BEFORE...
- Page 2 BIG LEAGUE PARTS LIST Spiral Bottom Spiral Top Steel Wire Ball Ramp Feeder Base Rubber Tip Legs Pole Sections (Qty 3) (Qty 2) Tripod A/C Plug (Qty 1) (Qty 1) BIG LEAGUE ASSEMBLY INSTRUCTIONS STEP 1: Locate Part (A) and insert Parts (B) into the tripod base as shown.
- Page 3 BIG LEAGUE ASSEMBLY INSTRUCTIONS (Continued) STEP 3: Take Part (F) and push it onto Part (C) base as shown. STEP 4: Push Part (D) onto Part (F) by aligning the notches and pushing down firmly. Do the same for Part (E) onto Part (D) as shown.
- Page 4 BIG LEAGUE OPERATION INSTRUCTIONS Balls: The Big League will use any regulation sized ball. Heater Sports recommends Slider Synthetic Leather Lite-Balls, Slider Soft Lite-Balls, or Heater Baseballs Power: The Big League Power Adapter will plug into any standard wall outlet. After connecting the Big League to electric or battery power, turn on the machine with the power switch located on the side of Part (F).
Need help?
Do you have a question about the Big League Pro and is the answer not in the manual?
Questions and answers