Oal-100 Installation Process; Unpack The Box And Take Out Cover; Installation Of Bottom Track On The Wall - Omega OAL-100 Installation Instructions Manual

7. OAL-100 installation process

7.1 Unpack the box and take out cover

✓ Use 1/8" allen key to take out cover screws

7.2 Installation of bottom track on the wall

✓ Mark the location of the motor on back plate
✓ Use 1/4" allen key to take out gearbox fasteners and remove gearbox
✓ Use 1/4" allen key to take out controller fasteners and remove controller
✓ Use drill with drill bit that matches screw size to drill for mounting screws.
✓ Always drill between channels
✓ Drill at least 6 holes on gearbox side and 4 on controller side
Fig 7.1.1
Fig 7.2.1
OMEGA AUTOMATICS 2020 v3.0.2
9