Now, you can follow the below process:
✓ Keep the door close
✓ Install the track on top of the door same as the following dimensions
✓ Slide the roller into the track and push the arm through the spindle then tight the screw with washer at the middle
of spindle
7.5 Programming (Basic)
✓ Setting door position switches.
✓ Refer to image how the top magnetic switches on gearbox should be set up
Fig 7.4.2.1
Fig 7.4.2.2
Fig 7.4.2.3
OMEGA AUTOMATICS 2020 v3.0.2
14