General Information; Installation Instructions; Manual Storage; Omegaautomatics.com Website - Omega OAL-100 Installation Instructions Manual

2. General Information

2.1 Installation Instructions

This manual provides installation instructions for OAL-100 automatic swing door operators used in Single door and pair
door installations.

2.2 Manual storage

This document must be kept in a secure place, and accessible for reference as required If the door system should be
transferred to another facility ensure that this document is transferred as well.

2.3 omegaautomatics.com website

Manuals are available for review, download, and printing on the omegaautomatics.com website.

2.4 Dimensions

Unless otherwise specified, all dimensions are given in inches (")

2.5 Building codes and standards

OAL-100 installation: observe applicable national and local building codes

3. Product description

3.1 Intended use

The OAL-100 is electromechanical operators used exclusively for opening and closing interior or exterior swing doors.
The OAL-100 operator installed in a surface mount header at customer site. The header must be installed on an interior
building surface. For double swing doors, both operators are installed in a single header.
❖ To reduce risk of injury to persons, use this OAL-100 operator only with automatic Swing doors that the operator
is designed for Reference Chapter 6, Technical data.
3.2 Maximum door weight
OAL-100: 250 pounds (113.398 kg) at 48" door width.
*Based on prevailing conditions at the door opening.
6
OMEGA AUTOMATICS 2020 v3.0.2