Hardware As Shipped; Single Swing Door; Double Swing Door; Safety Information - Omega OAL-100 Installation Instructions Manual

3.3 Hardware as shipped

3.3.1 Single swing door

1. Box containing surface mount header assembly for one OAL-100 operator. Included inside header:
Surface Mount
Motor Gearbox
Control Board
Arm Assembly Kit

3.3.2 Double swing door

1. Box containing surface mount header assembly for two OAL-100 operators. Included inside header:
Manual and Auto (Surface
Mount)
1 Motor Gearbox
1 Control Board
2 Arm Assembly Kits
Mount Plate for Manual Door
Closer (LCN4040)

4. Safety information

4.1 Safety Instructions

This document contains important instructions for installation of the OAL-100 swing door operators. Renew these
instructions thoroughly prior to installation and follow them carefully during installation commissioning, troubleshooting
and maintenance.

4.2 Safety warnings

❖ Damage to equipment or incorrect equipment operation may result from an incorrect installation.
❖ Hazard to mechanical processes by use of control settings elements or procedures not documented in this manual!
❖ Electric shock hazard!
❖ By use of control elements, settings of Procedures not documented in this manual!
❖ Work on electrical equipment and 115 VAC wiring installation must be performed only by qualified personnel!
❖ Metallic doors must be grounded per national and local codes!
OHC (Over Head Concealed)
Motor Gearbox (Spline/ Square
spindle)
Control Board
Center Spindle Arm Assembly Kit
Center Hung Top Arm
Manual and Auto (OHC or In
Ground)
Motor Gearbox (Spline/ Square
Spindle)
Manual Door Closer Dorma RTS 88
Center Spindle Arm Assembly Kit
or Center Hung Top Arm
In Ground Bottom Arm
OMEGA AUTOMATICS 2020 v3.0.2
In Ground
Motor Gearbox
Control Board
Square Spindle Jockey Box
Bottom Arm
Double Auto
2 Motor Gearboxes
2 Control Boards
2 Arm Assembly Kit (depends on
the type of the operator)
7