Density; Color; Number Position Vertical/Number Position Horizontal - Canon IMAGERUNNER C2550 Printer Manual

■ Density

1 to 5; 3
*
This setting enables you to adjust the number density and has 5 levels you can
adjust, with level '3' (middle level) being the default setting. Selecting '1' makes
the number lighter, and selecting '5' makes it darker.
NOTE
This function is only available if 'Copy Set Numbering' is set to [On].

■ Color

Yellow, Magenta, Cyan, Black*, Red, Green, and Blue
This setting enables you to specify the color of the copy number.
NOTE
This function is only available if 'Copy Set Numbering' is set to [On].

■ Number Position Vertical/Number Position Horizontal

-5/16 to +5/16 inches (in increments of 1/16 inches); 0
The position of the copy numbers specified with 'Print Position' can be finely
adjusted by offsetting them in the horizontal or vertical directions. The adjustment
can be made in increments of 1/16" (1 mm) from -5/16" (-8 mm) through +5/16"
(+8 mm).
You can increase or decrease the setting value to adjust the print position of the
copy numbers, as described below.
Number Position Vertical: Increasing the setting value moves the print position
in the downward direction of the paper. Decreasing the setting value moves the
print position in the upward direction of the paper.
Number Position Horizontal: Increasing the setting value moves the print
position to the right. Decreasing the setting value moves the print position to the
left.
Horizontal "+" direction
00001
00001
Original print position of copy numbers
00001
00001
* inches
3-41
Settings Menu
3