Checking and Changing Print Jobs
This section describes the procedures for the job processes listed below.
Canceling Print Jobs (See p. 2-12.)
•
Canceling All Operations (Reset Printer) (See p. 2-17.)
•
Temporarily Stopping Print Jobs (See p. 2-18.)
•
Form Feeding Print Data (See p. 2-21.)
•
Skipping an Error during Printing (See p. 2-25.)
•
Printing Secured Documents (See p. 2-28.)
•
Printing Encrypted Secured Documents (See p. 2-33.)
•
IMPORTANT
You can restrict the display of the System Monitor screen under the following conditions
•
if "Display Status Before Authentication" in System Settings (from the Additional
Functions screen) is set to [Off]. (The default setting is [On].)
When "Display Status Before Authentication" is set to [Off]
✓: Displayed
✗
: Not Displayed
Login service
(Department ID
Management, SSO, SDL,
Before logging in
After logging in
*
Even if you set the Display Status Before Authentication mode to [Off], access to the System Monitor screen is
only restricted if a login service is set.
You can receive print jobs only for encrypted secured documents with this machine if
•
"Only Allow Encrypted Secured Jobs" in System Settings (from the Additional Functions
screen) is set to [On]. A job will be canceled and an error message displayed if a print job
other than an encrypted secured print job is received. (The default setting is [Off].)
Print, Copy, Send, Fax,
and Receive screens
etc.)
System Monitor screen
Device Status screen
✗
✓
Checking and Changing Print Jobs
2
✓
✓
2-11