Toner Volume Adjustment; Line Control - Canon IMAGERUNNER C2550 Printer Manual

Ps/pcl/ufr ii printer guide
Hide thumbs Also See for IMAGERUNNER C2550:
Table of Contents

Advertisement

■ Toner Volume Adjustment

3

■ Line Control

3-20
Settings Menu
Normal
, Gradation, and Text
*
This setting enables you to adjust the toner volume so that it falls within a
restricted value when the toner volume exceeds a device-internal value for text,
lines, or other types of print data. Under most circumstances, it is preferable to
leave this setting as [Normal].
If [Normal] is selected, text and line data are printed with a toner volume that
upholds the resolution for text and lines. Other types of data are printed with a
toner volume that upholds the color.
If [Gradation] is selected, all data is printed with a toner volume that upholds the
color.
If [Text] is selected, all data is printed with a toner volume that upholds the
resolution.
NOTE
The internal restriction value cannot be changed.
This setting can only be applied to jobs in the PS mode and PDF1.5 mode.
If [Gradation] is selected, characters and lines may bleed.
If [Text] is selected, the color may not match.
Resolution
*
, Gradation
This setting enables you to specify the image processing for lines. Under most
circumstances, it is preferable to leave this setting as [Resolution].
If [Resolution] is selected, image processing is performed that upholds the same
resolution as text for lines.
If [Gradation] is selected, image processing is performed that upholds the same
color and gradation as graphics for lines.
NOTE
This setting can only be applied to jobs in the UFR II mode, PCL6 mode, PS mode,
and PDF1.5 mode.

Advertisement

Table of Contents
loading

Table of Contents