Canon IMAGERUNNER C2550 Printer Manual page 228

PDL UFR II Layout Error
Cause
Remedy 1 Set the Graphics Mode in the UFR II printer driver to 'Raster Mode' and print the
Remedy 2 After canceling the print job, reset the printer to increase the amount of
Remedy 3 Perform [Error Skip] and continue printing. However, the data will not be printed
NOTE
If 'Auto Continue' is set to [On], this error is skipped automatically. (See "Auto Continue,"
on p. 3-26.)
PDL UFR II Version Err
6
Cause
Remedy 1 Install a UFR II printer driver that can be used with your machine and then print
Remedy 2 Perform [Error Skip] and continue printing. However, the data will not be printed
PDL UFR II Work Mem Full
Cause
Remedy 1 Set the Graphics Mode in the UFR II printer driver to 'Raster Mode' and print the
Remedy 2 After canceling the print job, reset the printer to increase the amount of
Remedy 3 Perform [Error Skip] and continue printing. However, the data will not be printed
NOTE
If 'Auto Continue' is set to [On], this error is skipped automatically. (See "Auto Continue,"
on p. 3-26.)
6-12
When a Message Is Displayed
The page layout cannot be processed due to lack of memory.
data again. (See the Help function on the UFR II printer driver.)
available memory and print again. (Note that print data in memory such as
secured print jobs and any jobs being processed will be deleted.) (See "Reset
Printer," on p. 3-100.)
correctly.
The machine received data from an incompatible UFR II version.
the data again.
correctly.
The work memory for the UFR II mode is full.
data again. (See the Help function on the UFR II printer driver.)
available memory and print again. (Note that print data in memory such as
secured print jobs and any jobs being processed will be deleted.) (See "Reset
Printer," on p. 3-100.)
correctly.
Error Skip
Error Skip
Error Skip