Cold Start Mode (Initialization); Cd Test Mode - Denon RCD-M39 Service Manual

3. Cold start mode (initialization)

(1) Plug AC cord into power outlet while pressing "SOURCE" and " 8 / -" button same time on Main Unit.
Initialize.
I N I T I A L I Z E
SOURCE
TUNER BAND
TUNER frequency
TUNER PRESET
Set -/+
SDB
BASS
TREBLE
BLANCE
DIMMER
VOLUME
Clock
ALARM SOURCE
ALARM ON
ALARM OFF
SPK OPTIMISE
iPod MODE
AUTO STANDBY
DAB Module (EK)
Protection memory
※ The following settings are not initialized.
• Laser ON TIME and Laser Current
• Power supply abnormal flag
(2) After initialization, the unit will start in normal mode (Power On).

4. CD test mode

(1) Plug AC cord into power outlet while pressing "Power operation ( X )" and "SOURCE" button same time on Main Unit.
" 1 3 "
0 0 C D
(2) Move the slide to the initially set position (10 mm towards the outside from the innermost position).
(3) Check by performing key input. Refer to 4.2 q ～ 4.2 y .
(4) Cancel the mode by turning the power back on.
※ Do not push the button without the explanation.
4.1 Disc loading
(1) Press the " 5 " button to open the tray.
(2) Set a disc on the tray, then press the "
(3) Move the slide to the initially set position (10 mm towards the outside from the innermost position) and stop in this
status.
All manuals and user guides at all-guides.com
Default
DISC
EK:DAB, other FM
Minimum reception frequency
0
PRESET
OFF
0
0
CENTER
100%
8
E3:AM12:00, Other:0:00
DISC
E3:AM12:00, Other:0:00
E3:AM12:00, Other:0:00
ON
REMOTE
E2/EK:ON, E3:OFF
Initialzed Module
NO PROTECT
T E S T M O D E
( 1 , 3 flashing)
" button again to close the tray.
5
22