Denon RCD-M39 Service Manual page 24

4.3 Pickup movement
(1) In the stop mode, pickup moves in REV (inwards) or FWD (outwards) direction when " 8 / -" or "+ / 9 " button
pressed.
(2) When " 8 / -" button pressed, move to stop operation after detection that inner switch has turned on.
(3) Pickup movement stops when button released.
4.4 Stop
(1) When " 2 " button is pressed, play operation and servo stop.
(2) After stopping, conduct reading of auto adjust values.
4.5 All servo on
• Press and hold the "SOURCE" button for 5 seconds and longer to turn on all servos. The system is automatically
adjusted and the playback operation starts. (Playback sound output)
" 1 3 "
4.6 Adjustment value display
(1) When "DIRECT" button is pressed, the adjustment values are displayed in the following order.
q FOCUS BALANCE
" 1 3 "
X X X X
F O C U S
w FOCUS GAIN
" 1 3 "
X X X X
F O C U S
e TRACKING BALANCE
" 1 3 "
X X X X
T R A C K I N G
r TRACKING GAIN
" 1 3 "
X X X X
T R A C K I N G
t FOCUS OFFSET
" 1 3 "
X X X X
F O C U S
y TRACKING OFFSET
" 1 3 "
X X X X
T R A C K I N G
All manuals and user guides at all-guides.com
@ @ Tr X X : X X
( 1 , 3 flashing / @@:T.No / XX:XX:Time)
B A L A N C E
( 1 , 3 flashing / XXXX:Adjustment value)
G A I N
( 1 , 3 flashing / XXXX:Adjustment value)
B A R A N C E
( 1 , 3 flashing / XXXX:Adjustment value)
G A I N
( 1 , 3 flashing / XXXX:Adjustment value)
O F F S E T
( 1 , 3 flashing / XXXX:Adjustment value)
O F F S E T
( 1 , 3 flashing / XXXX:Adjustment value)
24