Service Mode; Cold Start Mode (Initialization) - Denon RCD-M38 Service Manual

SERVICE MODE

1. Version Display Mode
(1) Plug AC cord into power outlet while pressing ON/STANDBY and DIRECT button same time on Main Unit.
(2) Press the "SDB/TONE" button to the display the 2nd item information on the Display.
【Main µ-com Ver.】→【USB µ-com Ver.】→【iPod Dock Ver.(Connecting Dock)】→【Main µ-com Ver.】→・・・
【Main µ-com Ver.】
V e r
【USB µ-com Ver.】
U S B
2 0 1 0
【iPod Dock Ver.(Connecting Dock)】
D O C K
(3) Unplug AC cord to clear this mode.
2. VFD checking mode
(1) Plug AC cord into power outlet while pressing ON/STANDBY and OPEN/CLOSE button same time on Main Unit.
(2) All segment of VFD is turning on and off every one second. MUTING ON．
(3) Unplug AC cord to clear this mode.

3. Cold start mode (initialization)

(1) Plug AC cord into power outlet while pressing ON/STANDBY and 8 / - button same time on Main Unit.
Initialize.
I N I T I A L I Z E
source
TUNER(band)
SDB
BASS
TREBLE
BALANCE
DIMMER
VOLUME
TUNER Preset
Set -/+ (TUNER)
Clock
TIMER (EVERYDAY/ONCE)
SPK OPTIMISE
iPod mode
AUTO STANDBY
DAB Module (EK)
Protection memory
※ The following settings are not initialized.
• Laser ON TIME and Laser Current
• Power supply abnormal flag
(2) After initialization, the unit will start in normal mode (Power On).
1 0 0 4 2 7 0 1 v E K
V E R
0 4 3 0
V E R # # # #
DISC
FM (DAB Model:DAB)
OFF
0
0
CENTER
100%
8
All 0
PRESET -/+ button
00:00（Blink, E3 Model : AM12:00
Timer function CD
ON TIME 0:00 (E3:AM12:00)
OFF TIME 0:00 (E3:AM12:00)
ON
Remote mode
OFF
Initialzed Module
NO PROTECT
0 0
Default
18