Setting Up Hotkey Onscreen Display - BenQ Joybook 2000 Series User Manual

JB2000E.book Page 12 Tuesday, March 23, 2004 8:57 AM

Setting up Hotkey Onscreen Display

1. Click the Start button on Windows Taskbar located at the bot-
tom side of the screen and then select Programs, Hot Key Man-
ager, Configuration from the menus that appear. The following
window will pop up on the screen. Click the Onscreen tab.
2. Check the Show text onscreen message checkbox to enable hot-
key Onscreen Display. To enable onscreen volume control mes-
sage, check the Show volume controls onscreen checkbox.
Uncheck all checkboxes if you want to disable all Onscreen Dis-
play functions.
12 Using the Q-Media Bar
• If the Onscreen Display functions are enabled, you can also cus-
tomize the style of the onscreen messages by clicking the Start
button and then select Programs, Hot Key Manager, OnScreen Dis-
play.
• To close Hot Key Manager, click the Start button and then select
Programs, Hot Key Manager, Close Hot Key Manager. The hotkey
functions will also be disabled.