Function Hotkeys - BenQ Joybook 2000 Series User Manual

JB2000E.book Page 6 Tuesday, March 23, 2004 8:57 AM

Function Hotkeys

You can use the function hotkeys to access commonly used functions or make quick settings. To use the hotkeys, press and hold the Fn key at
the lower left corner of the keyboard, and then press the desired hotkey.
Fn + F1 Puts Joybook into standby mode (the
hard disk and screen will be tempo-
rarily turned off to conserve power).
Fn + F2 Enables/disables wireless LAN func-
tion.
Fn + F3 Switches display between the screen
and an external monitor/projector, or
allows simultaneous display.
Fn + F4 Decreases screen brightness.
Fn + F5 Increases screen brightness.
6 Touring Your Joybook
Fn + F6 Activates or deactivates the speakers.
Fn + F7 Decreases speaker volume.
Fn + F8 Increases speaker volume.
Fn + F9 Plays/pauses the playback of the CD in
the optical drive.
Fn + F10 Stops playing the CD in the optical
drive.
F2 Press the this key during startup to
enter the BIOS setup menu.
Fn + F11 Fast rewinds through the media con-
tent on the CD in the optical drive.
Fn + F12 Fast forwards through the media con-
tent on the CD in the optical drive.
Esc Press this key during startup to open
the boot device menu.