Troubleshooting - Northern Lights TECHNICOLD OM-NI Operator's Manual

FAULT
Compressor Overload
Auger Overload
Raw Water Pump Overload
Discharge Pressure
Suction Pressure
INDICATIONS
Compressor
Auger
Raw Water Pump
Water Valve Solenoid
Discharge Pressure OK
Suction Pressure OK
Water Level Low
Start/Stop/Reset
Bin Full

Troubleshooting

REMEDY
Compressor amperage high. Check raw water circuit for restriction.
Auger amperage high. Check ice delivery hose for blockage.
Pump amperage high. Check raw water circuit for restriction.
Discharge pressure high. Check raw water circuit for restriction.
Suction pressure low. Check ice delivery hose for blockage.
DESCRIPTION
Compressor running
Auger running
Pump running
Water valve solenoid energized
High pressure switch closed
Suction pressure switch closed
Water reservoir filling with water. If indication stays on for more than a
minute check fresh water feed.
Indicates status of switch
On when bin is full, off when bin level drops
OM-NI 2/20
16