Table of Contents
Advertisement
Section 1
GENERAL INFORMATION
1.1
C
S
N
1.2
C
1-1
2-4
WARNINGS, CAUTIONS AND NOTES
Within this handbook, pay particular attention to Warnings, Cautions, and
Notes, examples of which are shown below.
I
NDICATES THE POSSIBILITY OF PERSONAL INJURY IF INSTRUCTIONS ARE
NOT FOLLOWED CAREFULLY
Indicates a possibility of equipment damage if the instructions are not
followed carefully.
INDICATES SERVICEABLE PARTS
NOTE. Gives added information that will make operation of the equipment
easier.
SAFETY PRECAUTIONS
The P374 Inspection System is designed to reduce hazards from electric
shock provided that proper operating procedures are followed. If it is
operated in an outdoor environment it is imperative that proper earthing
procedures are followed. Use of a Residual Current Detector (RCD) is
strongly recommended [USA - Ground Fault Interrupter (GFI)]
Ensure the system is not placed in or near surface water.
Always ensure that cabling is properly connected.
Always transport a generator with the minimum amount of fuel in the
tank.
Never connect or disconnect any part of the equipment when it is switched
on.
Always switch the system on and off using the mains supply switch.
Clean and sterilise equipment at regular intervals.
A
LWAYS USE HEAVY DUTY INDUSTRIAL GLOVES WHEN HANDLING ROD OR
CABLE WHICH IS BEING WITHDRAWN FROM A SEWER
T
O AVOID RISK OF BURNS
SWITCHED ON OR IMMEDIATELY AFTER SWITCH OFF
FOR IT TO COOL BEFORE HANDLING
A
RISK ASSESSMENT SHOULD BE PERFORMED PRIOR TO COMMENCING
WORK AS IT MAY HIGHLIGHT ADDITIONAL SAFETY ISSUES SPECIFIC TO THE
APPLICATION
.
,
DO NOT TOUCH THE CAMERA HEAD WHEN IT IS
.
P374 System User Manual
.
. L
EAVE AMPLE TIME
© Pearpoint Ltd
Advertisement
Table of Contents
