Table of Contents
Advertisement
Section 3
12VDC INPUT
2.4
2.5
N
2-2
Connectors Diagram
FRONT
MAINS POWER INPUT
VIDEO INPUT
(FROM VIDEO RECORDER)
SET MONITOR DISPLAY
For the best quality monitor picture it is best to view the
monitor straight-on, the picture quality will degrade when
viewed from different angles.
You can adjust the quality of the displayed picture by using
the monitor set-up controls situated on the left hand side of
the monitor.
You can turn the knobs to adjust the brightness and colour
of the picture to suit your own requirements.
N
ROD COUNTER SYSTEM
The rod counter display appears in the centre of the screen. The rod counter
requires calibrating on a regular basis to maintain accuracy.
NOTE. Should the counter run outside calibration the message "counter
needs cal" will be displayed. You should carry out the procedure
detailed below.
On powering up, the Pearpoint message will be
displayed briefly and the camera and lights will
operate. The system is now ready to use.
A pull-out sun shade is available to reduce the effects
of bright sunlight on the monitor.
VIDEO OUT
(TO VIDEO RECO
NOTE. The Hue control is for NTSC systems only.
P374 System User Manual
© Pearpoint Ltd
Advertisement
Table of Contents
