Table of Contents
Advertisement
Section 4
4.3
4.4
4.5
4.6
4.7
4.8
4.9
4-2
SET CURRENT TIME - [SET] [TIME]
This option allows system time to be set, in the form HHMM, e.g. 1530. Time is
in 24-hour clock format. After you press [TIME] move the cursor and overtype
the displayed time to set to the required value. Press [ENTER] to accept the
displayed time. The time will remain current.
SET ROD COUNTER - [SET] [COUNT] [SET]
This option allows the electronic rod counter reading to be pre-set to any valid
value within the allowable range. After you press [COUNT], move the cursor
and overtype the displayed reading to set to the required value.
Press [ESC] at any time to back out without changing anything. Press [ENTER]
to accept the displayed counter reading.
SET LANGUAGE - [CONF] [LANG]
Allows selection of language for on-screen text. The available languages are
English (UKENG), American English (USA), French (FRNCH), and German
(GERMN).
SET MEASUREMENT UNITS - [CONF] [UNITS]
Allows selection of Imperial or Metric units for the electronic rod counter
display. After pressing [UNITS] choose [METR] or [IMP].
SET DISPLAY COLOUR - [CONF] [DISP]
You can select the colour of the display text. You can select [BLACK] or
[WHITE].
SYSTEM RESET [CONF] [FCLR]
FCLR is short for Forced Clear. If you select this option, the computer in the
system is reset and all the text pages you have created are wiped clean. When
you press [FCLR] you will be asked to confirm by pressing "Y" and pressing
[ENTER]. You can back out by pressing the [ESC] key. You should not need
to use this function as part of your normal operations.
USER TEXT PAGES - [SET] [USR]
Used to create or edit one of the nine available text pages on which you can type
any information relevant to the survey. This information will be recorded on
video if used.
Nine pages, numbered 1 to 9, are available and any one of these can be overlaid
onto the TV picture so that it can be recorded along with the picture. Page 0
(zero) is a special page which is always blank.
You can use this page when you do not wish to have any text on the picture,
rather than clear down one of the other pages.
Each page can accept up to eight lines of 22 characters. You can use any of the
characters available on the computer keyboard to compose your text. The colour
of the text can be set using the [CONF] [DISP] option on the menu.
P374 System User Manual
© Pearpoint Ltd
Advertisement
Table of Contents
