Table of Contents
Advertisement
Section 3
3.5
1
1
6
3-6
FITTING 100MM (4") AXIS SKIDS LIVE GAS MAIN INSERTION
2
4
When you unpack your brush skid set, you will find two sets of 4 brushes, one
set of four moulded quadrants (back skids) and one set with two moulded
quadrants and the front half (front skids).
4
9
8
5
6
3
9
To fit the front skid
2
1.
Insert a brush (item 4) into each of
the slots on front half of the skid
(item 1).
2.
Fix the back two halves (item 2&3)
of the front skid together ensuring to
lock the flange over the collar of the
front half so that the brushes slide
into the slots of the rear quadrants
3
3.
Secure with the two M4x4 socket
head cap screws.
To fit the rear skid
1.
Place the front two halves of the
back skid (item 5&6) in place over
the camera hose and lock together
with the M4x4 socket head cap
screws.
2.
Insert a brush (item 9) into each of
7
the slots on the front two quadrants
of the skid (item 5&6).
3.
Fix the back two halves (item 7&8)
of the rear skid together ensuring to
lock the flange over the collar of the
front half so that the brushes slide
into the slots of the rear quadrants
4.
Secure with the two M4x4 socket
head cap screws.
P374 System User Manual
8
7
5
© Pearpoint Ltd
Advertisement
Table of Contents
