Unloading A Tape Cartridge - IBM 7208 Setup And Operator Manual

3.5.2 Unloading a Tape Cartridge

To unload a tape cartridge:
1. Make sure that the 7208 Tape Drive power is on (the power-on light should be on).
2. Press the unload button.
The 7208 Tape Drive rewinds, unloads, and ejects the tape. The process may take from 15 seconds to several minutes, depending on
the position of the tape and the amount of data written. On the LCD, the message EJECT displays, followed by the message
READY-NOTAPE. The status lights respond as follows:
The Ready light turns off.
The Activity light flashes during the unload operation.
The Activity light turns off when the cartridge is ejected from the tape drive.
Subtopics
3.5.2.1 Resolving Unload Error Messages
7208 Tape Drive Setup and Operator Guide
Unloading a Tape Cartridge
¦ Copyright IBM Corp. 1998
3.5.2 - 1