Table of Contents
Advertisement
Installation |
Removing the packaging rein-
forcements
To remove the packaging reinforcement
lean the machine backward, take the
reinforcement by pulling from the braid.
Removing the transportation
safety bolts
Before operating the machine, the
transportation safety bolts must definitely
be removed. For this,
1. Loosen the bolts thoroughly by turning
them anticlockwise with the help of a suit-
able wrench.
2. Pull off the transportation safety bolts.
3. Insert the plastic caps in the direction of
arrow into the holes from where the trans-
portation safety bolts are removed.
Please note! Keep the transportation
safety bolts in a safe place in order to
reuse them for any other transportation.
Transport your washing machine with the
transportation safety blots installed.
Adjusting the feet
Your machine must stand level and
balanced on its feet in order to operate
more silent and vibration-free.
First loosed the plastic counter nut on the
adjustable feet of your machine.
After maintaining the balance by
adjusting the feet, tighten the plastic
counter nut upwards.
7
EN
Hide quick links:
Advertisement
Table of Contents
