LAUNCH
10
Power interface
1.3 Performance Parameters
Sensor module:
Parameter
Number of channels
Precision
Amplitude range
Max output current
Predefined frequency range
Square wave signal pulse
frequency
Square wave signal duty cycle
Power supply
USB
DC voltage simulation
www.diagtools.eu, Pernavas 43A, Riga, Latvia, LV-1009, +37129416069, info@diagtools.eu
X-431 Module S2 User Manual
battery to supply power.
Power the module through the battery
clamps cable.
Range
2
1%
0~20V
20mA
0~20KHz
0~15KHz
0~100%
Simulator sensor output/max current
20mA (output is powered by battery)
Drive solenoid, ignition coil/output
current 2A (external power supply)
USB2.0 Type B (with charging and
power supply function/5V)
Support
4