Installation Instructions; Step 1 - Positioning - Zenith HydroTap G5 Installation Instructions Manual

Installation instructions

Step 1 – Positioning
Ensure there is adequate space in the installation area for all components, with
access to water and power. The ambient mains water braided hose length is
750mm. Electrical power cable length is 1.8m.
Filtered water tap
(Classic Tap shown)
UV-C Module
HydroTap
Command Centre
50 50
450
cut-out
Power for UV-C
Mains water inlet
Vent tray Side duct
Module
(isolation valve not
Mains
supplied)
power supply to
Command Centre
08 807042NZ v1.00 03.21 HydroTap G5 UltraCare Install Instruct