Please refer to the User Guide for all operational and maintenance features of
the HydroTap. The User Guide is located in the HydroTap Command Centre
filter door.
The Zenith filter should be replaced as recommended on the filter, or earlier if
you notice a persistent reduction in water flow from the tap or an increase in
chlorine, taste or odour in the water. Not changing the filter cartridges when
required may affect the water quality.
For safe operation after periods of non-use longer than 72 hours, flush the
HydroTap for at least 60 seconds.
Operation & maintenance
Cleaning
Do not use strong, corrosive or abrasive cleaning
materials on the HydroTap tap or Command Centre.
Do not use "self-drying" disinfectant sprays.
Wipe external surfaces with a damp cloth or
antibacterial alcohol wipe, then immediately wipe
dry with a clean, dry microfibre cloth or paper towel.
Food-grade disinfection wipes may be used to clean
within the tap dispensing outlets.
End of life disposal
In order to help preserve our environment we ask that
you dispose of this product correctly. Please contact
your local city council for collection centre details.
807042NZ v1.00 03.21 HydroTap G5 UltraCare Install Instruct
19