Step 5 - External Filter Installation (Optional) - Zenith HydroTap G5 Installation Instructions Manual

UltraCare
Step 5 – External filter installation (optional)
Set bypass valve (optional)
The bypass valve diverts the boiling feed water to external filtration
(optional; internal filter is supplied with the unit). The valve is located at
the rear of the Command Centre. It is factory set to operate without an
external filter. If an external filter is installed, rotate the bypass valve as
shown.
Refer to the LCD screen to perform a filter flush of at least 10 litres.
14 807042NZ v1.00 03.21 HydroTap G5 UltraCare Install Instruct
Installation instructions
UV-C Module
Without external filter
(factory setting)
Mixer Tap
(optional)
IN OUT
With external filter
Bypass /Booster
(selected models)
OUT IN