American Standard PFWF071A93ABA Installation Manual page 38

Oil fired water boiler with three pass cast iron heat exchanger
Table of Contents

Advertisement

Approved Boiler/Oil Burner Combinations
*PFWF071A93ABA
Burner Model
for 3 Pass Cast Iron
HX, 3 Sections
Burner Model
BAYRAF03ABURNA
Firing Rate
0.50 GPH
Insertion Depth
Nozzle Size
Spray Pattern
80°B
Nozzle Mfg.
Delavan
Alt Nozzle
Spray Pattern
Nozzle Mfg.
Pump Pressure
Air Gate
Turbulator
*PFWF242A98ABA
Burner Model
for 3 Pass Cast Iron
HX, 8 Sections
Burner Model
BAYRAF10ABURNA
Firing Rate
1.73 GPH
Insertion Depth
Nozzle Size
Spray Pattern
30°B
Nozzle Mfg.
Delavan
Alt Nozzle
Spray Pattern
30°B
Nozzle Mfg.
Hago
Pump Pressure
Air Gate
Turbulator
18-CG03D1-4
38
*PFWF099A94ABAA
for 3 Pass Cast Iron
HX, 4 Sections
BAYRAF03ABURNA
0.70
2.0"
2.0"
0.40
0.55
80°B
Delavan
N/A
0.55
N/A
60°B
N/A
Delavan
170
160
1.5
2.5
0.0
1.0
*PFWF286A99ABAA
for 3 Pass Cast Iron
HX, 9 Sections
BAYRAF10ABURNA
2.05 GPH
2.0"
2.0"
1.35
1.65
60°B
Delavan
1.35
N/A
N/A
N/A
165
155
3.4
3.4
2.0
4.0
*PFWF132A95ABAA
*PFWF164A96ABAA
for 3 Pass Cast Iron
for 3 Pass Cast Iron
HX, 5 Sections
HX, 6 Sections
BAYRAF05ABURNA
BAYRAF05ABURNA
0.94
2.0"
0.80
60°W
Delavan
0.80
60°B
Delavan
140
2.5
0.0
Note:
1. * May be "A" or "T"
2. Burner mounting flange insertion depth; measured from tip of end cone to flange.
3. Due to positive pressure in the combustion chamber, it is recommended that the
air tube and flange be sealed.
4. Unit model *PFWF071 and *PFWF099; BAYRAF03ABURNA burner with 6 slots
reverse flow turbulator disk.
5. Burners tested under single gravity fed fuel system, burner cover in place during
all recordings and observations.
6. The *PFWF071, *PFWF099, and *PFWF132 models use a baffle in the flue passages.
7. BAYRAF03ABURNA ships with 0.40 Delavan nozzle installed with 80° B spray pattern.
0.55 nozzle is included, but not installed.
8. BAYRAF05ABURNA ships with 0.80 Delavan nozzle installed with 60° W spray pattern.
1.00 & 1.20 Hago nozzles are included, but not installed.
9. BAYRAF10ABURNA ships with 1.35 Delavan nozzle installed with 30° B spray pattern.
1.65 nozzle is included, but not installed.
*PFWF201A97ABAA
for 3 Pass Cast Iron
HX, 7 Sections
BAYRAF05ABURNA
1.17
1.44
2.0"
2.0"
1.00
1.20
60°W
60°B
Delavan
Delavan
1.00
1.20
60°SS
60°B
Hago
Hago
135
145
3.0
3.5
2.0
4.0

Advertisement

Table of Contents
loading

Table of Contents