Operation; Power On/Off, Reset, Charging; Setups For The Flx100 Smart Antenna - Leica Zeno FLX100 User Manual

3
3.1
Description
3.2
Setup on a pole
16

Operation

Power On/Off, Reset, Charging

21304_002
Function
Power on/off
Charging

Setups for the FLX100 Smart Antenna

To attach the FLX100 smart antenna on the top of a pole, the pole mount
adapter is required - Art. 915867.
Follow these steps to connect the FLX100 smart antenna to the pole.
1
21376_001
1. Use a slot screwdriver to fix the pole mount adapter with both
screws to the FLX100 smart antenna.
☞
Make sure to fix the pole mount adapter in the correct
orientation.
2. Screw the pole clockwise into the pole mount adapter.
a
b
Description
Turn on:
Press and hold the power button until the battery
LED goes green and the device sounds a beep.
☞
The device starts booting after the first
beep. Once it booted up, the device
sounds a second beep.
Turn off:
Press and hold the power button until the battery
LED goes out and the device sounds a beep.
Use the standard charger and type-C data cable to
charge. The battery LED indicator is red while char-
ging and green when charging is finished.
2
a Power on/off button
b Battery LED indicator
Operation