Table of Contents
Advertisement
Remark: Observe the pumping
heights.
The maximum pumping height bed
washbasin
plastic stand
pipe with rubber
run muff or a
floor drain
The connection position
tie with a
hose clamp
(24-40 mm) bore
gene.
the water drainage
feeding hose with
a bend
fixate and
gene.
the water drainage
feeding hose with
a bend
fixate and
gene.
Set up and connect NL
4.7 Adjusting the device
To reduce noises and vibrations and to
prevent the device from walking, place
the device horizontally.
Loosen the lock nuts with a SW17
1.
open-end wrench.
To adjust the appliance, turn the
2.
appliance feet. Check the horizontal
adjustment of the appliance with a
spirit level.
All appliance feet must be firmly
planted on the floor.
17
Advertisement
Table of Contents
