Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bosch WAX32KH1BY
Summary of Contents for Bosch WAX32KH1BY
- Page 1 Washing machine WAX32KH1BY [en] User manual and installation instructions...
-
Page 2: Table Of Contents
Table of contents 1 Safety .......... 4 10 Before using for the first time........ 36 1.1 General information.... 4 10.1 Starting an empty washing 1.2 Intended use....... 4 cycle ........ 36 1.3 Restriction on user group... 4 1.4 Safe installation ...... 5 11 Laundry........ 37 1.5 Safe use ........ 7 11.1 Preparing the laundry ..... 37 1.6 Safe cleaning and mainten-... - Page 3 19 Troubleshooting....... 59 15.2 Dispenser contents .... 44 15.3 Basic dosage ...... 45 20 Transportation, storage and disposal ........ 70 16 Home Connect ...... 45 20.1 Removing the appliance .. 70 16.1 Connecting the appliance 20.2 Inserting the transit bolts.. 70 to a WLAN home network (Wi-Fi) with WPS function .. 45 20.3 Using the appliance again .. 71 16.2 Connecting the appliance...
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡... -
Page 5: Safe Installation
Safety en 1.4 Safe installation Take note of the safety instructions when installing the appliance. WARNING ‒ Risk of electric shock! Improper installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. - Page 6 en Safety WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶ Do not lift the appliance on your own. If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. ▶...
-
Page 7: Safe Use
Safety en ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains. - Page 8 en Safety WARNING ‒ Risk of poisoning! Detergents and care products may result in poisoning if con- sumed. ▶ If accidentally swallowed, seek medical advice. ▶ Keep detergents and care products out of the reach of children. WARNING ‒ Risk of explosion! Laundry that has been pretreated with cleaning agents that con- tain solvents may cause an explosion in the appliance.
-
Page 9: Safe Cleaning And Maintenance
Safety en CAUTION ‒ Risk of chemical burns! If the detergent drawer is opened, detergent and care products may spray out from the appliance. Contact with eyes or skin may cause irritation. ▶ Rinse eyes and/or skin thoroughly with clean water if they come into contact with detergents or care products. -
Page 10: Preventing Material Damage
en Preventing material damage Make sure that the valve housing ▶ Preventing material damage 2 Preventing material for the water inlet hose does not come into contact with its sur- damage roundings and is not subjected to any external forces. Follow these instructions to avoid ma- Preventing material damage Ensure that the inner diameter of terial damage and damage to the ap-... -
Page 11: Environmental Protection And Saving Energy
Environmental protection and saving energy en Do not use hard scouring pads or Add → Page 40 detergent based on ▶ cleaning sponges. the laundry's degree of soiling. Clean the appliance with nothing ▶ a For light to normal soiling, a smal- but water and a soft, damp cloth. ler amount of detergent is suffi- Remove all detergent residue, ▶... -
Page 12: Energy Saving Mode
en Installation and connection ATTENTION! The appliance comes with an Aqua- Objects remaining in the drum that Sensor. are not designed for operation with a During the rinse cycle, the Aqua- the appliance may cause material Sensor checks the degree of tur- damage and damage to the appli- bidity of the rinsing water, and ad- ance. -
Page 13: Contents Of Package
Installation and connection en 4.2 Contents of package After unpacking all parts, check for any damage in transit and completeness of the delivery. Washing machine WARNING Risk of electric shock! Accompanying documents The appliance contains live parts. Touching live parts is dangerous. Elbow for fixing the water out- Do not operate the appliance ▶... -
Page 14: Removing The Transit Bolts
en Installation and connection ATTENTION! Installation loca- Requirements If the appliance is installed in areas tion exposed to frost or outdoors, frozen On a wall Do not trap the residual water may damage the appli- hoses between ance and frozen hoses may crack or the wall and the split. -
Page 15: Removing The Transport Struts
Installation and connection en Unscrew and remove all four Put on the four cover caps. screws for the transit bolts with a WAF 13 wrench. Press down on the four cover caps. Pull the power cord out of the holder. 4.5 Removing the transport Remove the four sleeves. -
Page 16: Connecting The Appliance
en Installation and connection Unscrew and remove the screws in Remove the transport strut. the vertical transport struts using a T20 screwdriver. 4.6 Connecting the appliance Remove the transport struts. Connecting the water inlet hose Note: Please read the information in the Safety → Page 4 and Preventing material damage → Page 10 sections to ensure that you use the appliance safely. -
Page 17: Aligning The Appliance
Installation and connection en Water outlet connection types 4.7 Aligning the appliance This information is intended to help In order to reduce noise and vibra- you to connect this appliance to the tion and to prevent the appliance water outlet. from moving, align the appliance cor- Note: Please read the information in rectly. -
Page 18: Connecting The Appliance To The Electricity Supply
en Installation and connection Screw the lock nuts tightly against the housing using a WAF 17 wrench. In doing so, hold the foot tight and do not adjust its height. 4.8 Connecting the appliance to the electricity supply Note: Please read the information in the Safety → Page 4 and Preventing material damage → Page 10 sections to ensure that you use the appliance... -
Page 19: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. -
Page 20: Detergent Drawer
en Familiarising yourself with your appliance 5.2 Detergent drawer Manual dosing compartment / : Dispenser for fabric softener or detergent : Dispenser for detergent 5.3 Controls You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 27 Programme selector → Page 41... -
Page 21: Display
Display en Display 6 Display The display shows the current settings, options or relevant information. Display Display Designation Description 0:40 Programme dura- Approximate expected programme dura- tion/programme tion or programme time remaining. time remaining "Ready in" time The programme end has been set and the remaining number of hours is displayed. - Page 22 en Display Display Designation Description End of pro- Programme status gramme Childproof lock ¡ lights up: The childproof lock is activ- ated. ¡ flashes: The childproof lock is activated and the appliance has been operated. → "Deactivating the childproof lock", Page 44 ...
- Page 23 Display en Display Designation Description 50 ml Basic dosage Basic dosage for detergent or fabric softener. → "Basic dosage", Page 45 Foam detection The appliance has detected too much system foam. Door The door is unlocked and can be opened. ¡...
-
Page 24: Buttons
en Buttons Buttons 7 Buttons The selection of programme settings depends on the programme that is set. Buttons You can see the selection options for each programme in the overview for → "Programmes", Page 27. Button Selection Description Start/Reload ¡ Start Start, cancel or pause the pro- gramme. - Page 25 Buttons en Button Selection Description Spin Speed Re- - 1600 Adjust the spin speed or activate duction (Rinse Hold). is selected, the water is not drained at the end of the washing cycle and the spin cycle is deactiv- ated.
- Page 26 en Buttons Button Selection Description Prewash ¡ Activate Activate or deactivate prewash, e.g. for washing heavily soiled laundry. ¡ Deactivate Note: If the intelligent dosing system is activated, the detergent will be dis- pensed automatically for the prewash and the main wash. If the intelligent dosing system is de- activated, place the detergent for the prewash directly in the drum.
- Page 27 Programmes en Intensive Plus i-DOS i-DOS Prewash Spin Speed Reduction (Rinse Hold) Extra Rinse SpeedPerfect 1600 Max. spin speed (rpm) Max. temperature (°C) Max. load (kg)
- Page 28 en Programmes – – Intensive Plus i-DOS i-DOS Prewash Spin Speed Reduction (Rinse Hold) Extra Rinse – – SpeedPerfect 1600 1600 Max. spin speed (rpm) – Max.
- Page 29 Programmes en Intensive Plus i-DOS i-DOS Prewash Spin Speed Reduction (Rinse Hold) Extra Rinse SpeedPerfect 1200 Max. spin speed (rpm) Max. temperature (°C) Max. load (kg)
- Page 30 en Programmes – Intensive Plus i-DOS i-DOS Prewash Spin Speed Reduction (Rinse Hold) Extra Rinse – SpeedPerfect 1600 Max. spin speed (rpm) Max. temperature (°C) Max. load (kg)
- Page 31 Programmes en – – – Intensive Plus – i-DOS – – – i-DOS – – – Prewash Spin Speed Reduction – (Rinse Hold) – – Extra Rinse – – – SpeedPerfect 1600 1600 Max. spin speed (rpm) –...
- Page 32 en Programmes – – Intensive Plus – i-DOS – i-DOS – – Prewash Spin Speed Reduction – (Rinse Hold) – – Extra Rinse – – SpeedPerfect – 1200 Max. spin speed (rpm) – – Max. temperature (°C) Max.
- Page 33 Programmes en Intensive Plus i-DOS i-DOS Prewash Spin Speed Reduction (Rinse Hold) Extra Rinse SpeedPerfect Max. spin speed (rpm) Max. temperature (°C) Max. load (kg)
- Page 34 en Programmes Intensive Plus – i-DOS i-DOS Prewash Spin Speed Reduction (Rinse Hold) Extra Rinse – – SpeedPerfect Max. spin speed (rpm) Max. temperature (°C) Max. load (kg)
- Page 35 Programmes en – Intensive Plus i-DOS i-DOS – Prewash Spin Speed Reduction (Rinse Hold) Extra Rinse SpeedPerfect 1200 Max. spin speed (rpm) Max. temperature (°C) Max. load (kg)
-
Page 36: Accessories
en Accessories Accessories 9 Accessories Use original accessories. These have been made especially for your appliance. Accessories Order number Water inlet hose exten- Extend the water inlet WMZ2381 sion hose for cold water or AquaStop (approx. 2.50 Fixing brackets Improves the stability of WMZ2200 the appliance. -
Page 37: Laundry
Laundry en Add washing powder to the Laundry 11 Laundry manual dosing compartment. Laundry 11.1 Preparing the laundry Note: Please read the information in the Safety → Page 4 and Preventing material damage → Page 10 sections to ensure that you use the appliance safely. ATTENTION! Objects remaining in the laundry may damage the laundry and the drum. -
Page 38: Sorting Laundry
en Laundry – Separate items of laundry and – Type of fabric and fibre shake them out, or observe the Wash laundry of the same programme description type of fabric and fibre to- gether. – Care symbols on the care labels 11.2 Sorting laundry → Page 38 Note: Please read the information in... -
Page 39: Detergents And Care
Detergents and care products en Symbol Washing process Recommended pro- gramme Not suitable for machine-washing – ¡ Do not mix different liquid deter- Detergents and care products 12 Detergents and care gents ¡ Do not mix detergent and fabric products softener ¡ Do not use products that have ex- Detergents and care products Note: Please read the information in pired or are highly congealed... -
Page 40: Detergent Dosage
en Detergents and care products 12.2 Detergent dosage The detergent dosage depends on: You can find out how hard your ¡ The amount of laundry water is from your local water com- pany or measure it yourself using ¡ Degree of soiling a water hardness tester. -
Page 41: Basic Operation
Basic operation en 13.3 Adjusting the pro- Basic operation 13 Basic operation gramme settings Basic operation Requirement: A programme has 13.1 Switching on the appli- been set. ance → "Setting a programme", Page 41 Adjust the programme settings. Press . ▶ ▶ → "Programmes", Page 27 Notes ¡ The programme settings are not saved permanently for the pro- gramme. -
Page 42: Adding Detergent And Care Product
en Basic operation Ensure that there is no laundry a After the programme has ended, trapped in the door. the display shows: -0-. 13.7 Soaking laundry 13.5 Adding detergent and care product Note: No additional detergent is re- quired. The washing solution is then For programmes in which intelligent used for washing. -
Page 43: Resuming The Programme When The Programme Status Is Rinse Hold
Childproof lock en The appliance door remains 13.12 Switching off the appli- locked for safety reasons if the ance temperature and water levels are high. Press . – If the temperature is high, start Rinse programme. – If the water level is high: Start ... -
Page 44: Deactivating The Childproof Lock
en Intelligent dosing system a The controls are locked. Pull out the detergent drawer. a The childproof lock remains active Open the dispenser lid. even after the appliance has been switched off. 14.2 Deactivating the child- proof lock Requirement: To deactivate the childproof lock, the appliance must be switched on. -
Page 45: Basic Dosage
Home Connect en ¡ If you use both dispensers for li- tions via the Home Connect app, ad- quid detergent, you must select a just its basic settings and monitor its dispenser which is to be used dur- operating status. ing washing. The Home Connect services are not available in every country. -
Page 46: Homeconnect
en Home Connect Press and hold Remote Start (Wi-Fi) manually. The appliance approx. 3 seconds. briefly sets up its own Wi-Fi network. You can connect a mobile device to a The display shows Aut. the WLAN network and transfer the Press Start/Reload network information for the WLAN Press the WPS button on the home network (Wi-Fi) to your appli-... -
Page 47: Connecting The Appliance To The Home Connect App
Home Connect en Set the programme to position 3. a The display shows APP. Press Start/Reload a The appliance connects to the Home Connect app. Once your appliance is displayed in the Home Connect app, carry out the last steps in the Home Connect app. a If the display shows con, the appli- ance is connected to the Open the Home Connect app on... -
Page 48: Activating Wi-Fi On The Appliance
en Home Connect a If the appliance has connected to ¡ Switch off the appliance. the energy manager successfully, ¡ Power failure. the display shows con and . 16.5 Activating Wi-Fi on the Activate Flex Start if you want the smart energy system (energy man- appliance ager) to start up your appliance. -
Page 49: Resetting The Appliance Network Settings
Home Connect en Set the programme to position 6. 16.10 Data protection a UPd appears on the display. Please see the information on data Press Start/Reload protection. a The software update is installed. The first time your appliance is a If End is shown on the display, the registered on a home network software update is installed. -
Page 50: Basic Settings
en Basic settings Basic settings 17 Basic settings You can configure the appliance to meet your needs. Basic settings 17.1 Overview of basic settings Below is an overview of the basic settings on your appliance. Basic setting Programme posi- Value Description tion End signal 0 (off) Set the volume of 1 (quiet) -
Page 51: Changing The Basic Set- Tings
Cleaning and servicing en 17.2 Changing the basic set- Remove all de- Fresh deposits tergent residue, are easier to re- tings spray residue or move without Set the programme selector to po- other residues leaving any sition 1. immediately. residue. Keep the appli- This allows the ance door and residual water to... - Page 52 en Cleaning and servicing Press down on the insert and re- Empty the detergent drawer. move the detergent drawer. ATTENTION! The pump unit con- Remove the pump unit. tains electrical components. Do not clean the pump unit in the ▶ dishwasher and do not immerse it in water.
-
Page 53: Descaling
Cleaning and servicing en Clean the detergent drawer and Clean the inside of the detergent the lid with a soft, damp cloth or drawer housing. hand shower. Push in the detergent drawer. Dry the detergent drawer, lid and pump unit and reinsert them. 18.4 Descaling ATTENTION! The use of unsuitable descaling... - Page 54 en Cleaning and servicing Open the maintenance flap. Take the drain hose out of the holder. Remove the maintenance flap. CAUTION - Risk of scalding! When you wash at high temperat- ures, the detergent solution gets hot. Do not touch the hot detergent ▶...
- Page 55 Cleaning and servicing en Insert the drain hose into the Clean the interior, the thread on holder. the pump cap and the pump hous- ing. Cleaning the drain pump The pump cap is comprised of two parts which can be taken apart for Note: Please read the information in cleaning.
-
Page 56: Cleaning The Intake Opening In The Rubber Gasket
en Cleaning and servicing Insert the pump cap and screw it Check the intake opening for on as far as it will go. blockages and remove any block- ages. 90° The handle on the pump cap must be in a vertical position. Note: Do not use any sharp or poin- Insert the maintenance flap and ted objects. -
Page 57: Cleaning The Water Inlet Filter
Cleaning and servicing en Clean the water outlet hose and si- Cleaning the filter on the tap phon connecting piece. Note: Please read the information in the Safety → Page 4 and Preventing material damage → Page 10 sections to ensure that you use the appliance safely. - Page 58 en Cleaning and servicing Connect the water inlet hose and check for leaks.
-
Page 59: Troubleshooting
Troubleshooting en Troubleshooting 19 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 60 en Troubleshooting Fault Cause and troubleshooting "E:30 / -80" Unapproved extension installed on the water drain hose. Remove any unapproved extensions from the water ▶ hose. Connecting the appliance "E:36 / -25 / -26" Drain pump is blocked. → "Cleaning the drain pump", Page 53 ▶...
- Page 61 Troubleshooting en Fault Cause and troubleshooting "E:35 / -10" Call the after-sales service. ▶ → "Customer Service", Page 72 The detergent drawer has not been pushed in as far as it can go. Push the detergent drawer in as far as it will go. ▶...
- Page 62 en Troubleshooting Fault Cause and troubleshooting The appliance is not There has been a power cut. working. Check whether the lighting in your kitchen or other ▶ appliances are working. The programme does You have not pressed Start/Reload not start. Press Start/Reload ▶...
- Page 63 Troubleshooting en Fault Cause and troubleshooting The door cannot Water level is too high. be opened. Start the Drain programme. ▶ Power failure. Open the door using the emergency release. ▶ → "Emergency release", Page 70 The water is not drain- Drain pipe or water outlet hose is blocked. ing.
- Page 64 en Troubleshooting Fault Cause and troubleshooting Water is not flowing The tap is turned off. in. Detergent is not Turn on the tap. ▶ being dispensed. The water inlet hose is kinked or jammed. Ensure that the water inlet hose is not kinked or ▶...
- Page 65 Troubleshooting en Fault Cause and troubleshooting Drum does not turn, Load detection is active. water does not flow in. Not a fault – no action required. ▶ Note: The load detection can take up to two minutes. Heavy foam build-up Detergent dosage is too high. Immediate measure: Mix one tablespoon of fabric ▶...
- Page 66 en Troubleshooting Fault Cause and troubleshooting The spin programme Start the Spin programme. ▶ does not start. Rushing, hissing Water is flushed under pressure into the detergent noise. drawer. Not a fault – normal operating noise. ▶ Longer, whirring noise Intelligent dosing system dispenses detergent or care before the start of the products.
- Page 67 Troubleshooting en Fault Cause and troubleshooting The spin result is not Clean the drain pipe and the water outlet hose. ▶ satisfactory. The laun- Drain pipe or water drain hose is caught or jammed. dry is too wet/too Ensure that the drain pipe and water drain hose are ▶...
- Page 68 en Troubleshooting Fault Cause and troubleshooting Detergent residue on Check whether the detergent used is suitable. the dry laundry. → "Detergents and care products", Page 39 Drain the dispenser. → "Cleaning the detergent drawer", Page 51 Clean the dispenser. Refill the dispenser. → "Filling the dispenser", Page 44 Basic dosage is not correctly adjusted.
- Page 69 Troubleshooting en Fault Cause and troubleshooting No connection to the Reconnect the appliance to the home network. home network. → "Connecting the appliance to a WLAN home net- work (Wi-Fi) with WPS function", Page 45 → "Connecting the appliance to a WLAN home net- work (Wi-Fi) without WPS function", Page 46 Water is leaking out at Water inlet hose is not correctly/securely connected.
-
Page 70: Transportation, Storage And Disposal
en Transportation, storage and disposal Drain the remaining detergent 19.1 Emergency release solution. Releasing the door → "Cleaning the drain pump", Page 53 Requirement: The drain pump is Detach the hoses. empty. → Page 53 Empty the dispensers. ATTENTION! Escaping water may cause material damage. 20.2 Inserting the transit Do not open the door if you can ▶... -
Page 71: Using The Appliance Again
Transportation, storage and disposal en Insert all screws into the four 20.4 Disposing of old appli- transit bolts and tighten slightly. ance Valuable raw materials can be re- used by recycling. WARNING Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk. -
Page 72: Customer Service
en Customer Service Make a note of your appliance's de- Customer Service 21 Customer Service tails and the Customer Service tele- phone number to find them again If you have any queries on use, are Customer Service quickly. unable to rectify faults on the appli- ance yourself or if your appliance 21.2 AQUA-STOP guarantee needs to be repaired, contact Cus-... -
Page 73: Consumption Values
Consumption values en Consumption values 22 Consumption values The following information is provided in accordance with the EU Ecodesign Consumption values Regulation. The values given for programs other than the Eco 40-60 are indicat- ive only and were determined in accordance with the applicable standard EN60456. -
Page 74: Technical Specifications
(Wi-Fi): Declaration of Conformity 24 Declaration of Con- 5 Min. ¡ Networked formity standby mode (Wi-Fi): 1,50 W Robert Bosch Hausgeräte GmbH Declaration of Conformity Water pressure ¡ Minimum: hereby declares that the appliance 100 kPa with Home Connect functionality (1 bar) meets the essential requirements and ¡... -
Page 75: Declaration Of Conformity
Declaration of Conformity en 5 GHz WLAN (Wi-Fi): For indoor use only. - Page 76 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.