Table of Contents
Advertisement
6
Before first use
B prepare the device for use.
6.1 Start the wash cycle
without laundry
Your device has been thoroughly
checked before leaving the factory. To
remove any residual water, wash
without any laundry the first time.
Press .
1.
The power-on process takes a few
seconds.
The program Cleaning the drumSet
2.
up.
Close the door.
3.
Pull out the detergent drawer.
4.
Put the powder detergent in the
5.
manual dosing compartment.
To avoid foaming, use only half the
amount recommended by the
detergent manufacturer for light
soiling. Do not use wool or delicate
detergent.
Slide in the detergent drawer.
6.
Press Start/Refill
7.
to start the program.
a The display shows the remaining
program duration.
a After the program end, it shows
display: -0-.
Start the first wash cycle or press to
8.
→ "The Ministry in essence",
Page 32
to
Before first use NL
switch off the appliance.
21
Advertisement
Table of Contents
