Asus GigaX User Manual page 104

[Rule Mode] [IP Rule]
[Action] [Permit/Deny]
[Source IP] [Type/IP, Mask]
[Destination IP] [Type/IP, Mask]
[Source Port] [Type/Port]
[Destination Port] [Type/Port]
[Protocol] [ICMP/TCP/UDP/ANY]
[Add]
User can add a new IP rule associated to a filter set. These filter rule works
with ICMP, TCP or UDP protocols with permit or deny options. User can also
specify the IP address (source or destination) and port number of the filter rule
using the CLI command dstip/srcip and dstport/srcport, respectively.
CLI command : filter rule new <set id> <rule id> <protocol:
ICMP/TCP/UDP/any> <action: permit/deny>
CLI command : filter rule dstip <set id> <rule id> <type: (any/[ip]
[subnet])>
CLI command : filter rule srcip <set id> <rule id> <type: (any/[ip]
[subnet])>
CLI command : filter rule dstport <set id> <rule id> <type: (any/[port])>
CLI command : filter rule srcport <set id> <rule id> <type: (any/[port])>
[Rule Mode] [MAC Rule]
[Action] [Permit/Deny]
[Source MAC]
[Destination MAC]
[Modify]
Allows user to modify the MAC filter rule.
104