CLI command : snmp community delete
Allows user to delete a community entry from community table.
Community entry (table index): <entry id to delete>
This action will delete all hosts in community string with 'delete community'.
Are you sure? (y/n):[y] <y for 'yes'; n for 'no'>
Restores the previous saved settings from configuration file.
CLI command : snmp community retrieve
[Host IP Address] [Community]
A host entry contains a host IP address, network mask and its dedicated
CLI command : snmp host add
Host IP/Subnet: <IP address>
Community: <community string>
CLI command : snmp host set
User can modify a host entry in the table by reassigning its allowed IP address,
network mask and community string.
Host table entry (table index): <entry id to config>
Host IP/Subnet (old IP address): <new IP address>
Netmask (old netmask): <new netmask>
Community (old community string): <new community string>
CLI command : snmp host delete
Allows user to delete a host entry from host table.
GigaX Series L3 Managed Switch User Guide