Download  Print this page

Asus GigaX User Manual Page 89

Layer 3 managed switch.
Hide thumbs


Port <port number> Path Cost (1..200000000):[old port Path Cost] <new
port Path Cost>
Port <port number> EdgePort (yes/no):[old port EdgePort] <new port
EdgePort >
Port <port number> Point-to-Point (yes/no/auto):[old port Point-to-Point]
<new port Point-to-Point >
Restores the previous saved settings from configuration file.
CLI command : l2 stp retrieve
CLI command : l2 stp bridge retrieve
CLI command : l2 stp port retrieve
[Show Trunk]
Displays a specific trunk group settings. User can create a new trunk group by
specify a unique trunk ID, a trunk name description, the port selection criterion
(rtag), LACP mode (enabled or disable), and its trunk group member ports.
CLI command : l2 trunk show <trunk id>
[Create Trunk]
Creates a new trunk group by giving trunk ID, rtag, name, LACP mode and
port numbers. The "rtag" is the packet distribution algorithm for the trunk group.
Rtag values and corresponding meanings:
1: select port by source MAC
2: select port by destination MAC
3: select port by source and destination MAC
4: select port by source IP
5: select port by destination IP
GigaX Series L3 Managed Switch User Guide


Table of Contents


   Also See for Asus GigaX

   Related Manuals for Asus GigaX

This manual is also suitable for:

Gigax series

Comments to this Manuals

Symbols: 0
Latest comments: