Snmp - Asus GigaX User Manual

[Add/Remove Trusted Port]
Allows user to add or remove specific ports for DHCP snooping.
CLI command : l2 dhcpsnoop add <port list>
CLI command : l2 dhcpsnoop remove <port list>
[Retrieve]
Restores the previous saved settings from configuration file.
CLI command : l2 dhcpsnoop retrieve
5.3.5

SNMP

[Community Name] [Set]
A community entry contains a community description string and a set of
privileges. Get privilege are turned on by default, and user can specify whether
to give it the Set Privilege while create a new entry.
CLI command : snmp community add
New community string: <new community string>
Get privileges: [y, always turn on by default]
Set privileges? (y/n):[n] <set privilege, y for 'yes'; n for 'no'>
CLI command : snmp community set
User can modify a community entry in the table by reassigning its community
string and privileges.
Community entry (table index): <entry id to config>
Community string (old community string): <new community string>
This action will modify all hosts with community string from 'old community'
to 'new community'.
Are you sure? (y/n):[y] <y for 'yes'; n for 'no'>
Get privileges: [y, always turn on by default]
Set privileges? (y/n):[n] <set privilege, y for 'yes'; n for 'no'>
96