LEGRAND WattStopper UT-300 Series Installation Instructions Manual page 10

Ultrasonic low voltage occupancy sensor

Table of Contents

5. When the LED stops flashing, replace the Front Cover.

*Disabling Light Level

Pressing the pushbutton for 5 seconds or more resets the light to default (maxi-

mum).

Press and hold the Light Level button for 5 seconds or until the detection LED

turns ON and then OFF. the LED flashes rapidly for 10 seconds after the setting has

changed.

Call 800.879.8585 for Technical Support

Table of Contents

Wattstopper ut-300-1 Wattstopper ut-300-2 Wattstopper ut-300-3