Some Feature Configuration Instructions And Examples - 2connect 2C-WHS-26-2D User Manual

Some feature configuration instructions and examples

Barcode length limit configuration example
When configuring the barcode minimum length limit, you must ensure that the configured
minimum length is not greater than the current maximum length configuration,otherwise, errors will
be prompted.Similarly, when configuring the barcode maximum length limit, you must also ensure
that the maximum length of the configuration is not less than the current minimum length
configuration.
Example 2.1: Configuring Code 128 barcode length is 4-12 bits
Scan configuration code Code 128 minimum length limit,then scan the appendix data and edit the 4
in the barcode, save；
Scan configuration code Code 128 maximum length limit,then scan the appendix data and edit the
1,2 in the bar code, save；That is, the configuration is completed.
Example 2.2: Configure Interleaved 2 of 5 barcode length to 14 bits
Configure Interleaved 2 of 5 barcode length 14 bits to directly scan the quick configuration barcode
ITF25 14-bit length configuration,or configure it with the maximum and minimum length of
barcodes:
Scan configuration code Interleaved 2 of 5 minimum length limit,then scan the appendix data and
edit the 1,4 in the barcode, save；
Scan configuration code Interleaved 2 of 5 maximum length limit,then scan the appendix data and
edit the 1,4 in the barcode, save;That is, the configuration is completed.
Example 2.3: Configuring Code 39 barcode length to any length supported
Scan configuration code Code 39 minimum length limit,then scan the appendix data and edit the 0
in the barcode, save；
Scan configuration code Code 39 maximum length limit,then scan the appendix data and edit the 0
in the barcode, save;That is, the configuration is completed.
- 63 -