Start-Up, Shutdown, Standby And Restart; Maintenance; Reading Skills - 2connect 2C-WHS-26-2D User Manual

Indicator status
red light on
red light off
green light on
green light off
one blue light on
two blue light twinkle alternately

1.5 Start-up, shutdown, standby and restart

Start-up：Connect host computer with scanner, which will automatically start-up and in working
state.
Shutdown：Remove the data cable which is connected with scanner; remove the USB which is
connected with host computer;
Restart：If the product crash or no response when pressing button, please restart it.

1.6 Maintenance

* The window must be kept clean, the supplier do not bear the guarantee responsibility due to the
improper maintenance.
* Avoid the window being wear and tear or scratched by hard object
* Use the hairbrush to remove the stain on the window
* Clean the window with a soft cloth, such as lens cleaning cloth
* Spraying liquid onto the window is prohibited.
* Prohibit any cleaning solvents, except for the cleaning water.

1.7 Reading skills

If the barcode is small, it should be closer to the scanning window; if the barcode is large, it
should be far away from the scanning window a little more, thus easier to be read correctly.
If the barcode is highly reflective (for example, the coated surface), you may need to tilt the
barcode at an angle to successfully scan it.
Barcode scanning example：
Decode successfully
Pairing successful or connect to USB
Bluetooth HID pair mode
- 10 -
explain
Charging
No charging
No decoding