Real-Time Mode; Warehousing Mode - 2connect 2C-WHS-26-2D User Manual

C:Connect the receiver to the computer or other devices, and the buzzer "beeps" once the
pairing is successful, and the blue indicator light will be always on

2.2.2 Real-time mode

In real-time mode, the scanned data is transmitted directly to the computer via wired or wireless,Aaer
the transmission is successful, the scanner will emit a low-frequency short tone and the green
indicator will flash once.
If the transmission fails, three low-frequency short tones are issued to warn, and the green light
flashes three times.
Enter Real-Time Mode (Default)

2.2.3 Warehousing mode

If the scanner works beyond the wireless transmission range, the storage mode is recommended.In
warehousing mode, the scanned data is stored in the scanner's internal storage.
In the storage mode, after scanning a bar code, the scanner will emit a short tone (the frequency is
low first and then high).At the same time, the green light flashes once and the scanned bar code is
automatically stored in the scanner.
Enter Warehousing Mode
View the number of barcodes stored in the warehouse by scanning the "Display total
warehouse entries" barcode.
- 12 -