Screen Reading Mode; Center Mode - 2connect 2C-WHS-26-2D User Manual

Repeat Code Detection Interval 2s

2.16 Screen reading mode

When this mode is turned on, your scanner will be optimized to read the bar code displayed on
the display such as your phone or computer.However, turning this mode on may result in a slight
decrease in the speed at which the printed bar code is read.
Screen Reading Mode Off (Default)
Screen Reading Mode Turn On

2.17 Center mode

When the center mode is on, the scanner will only recognize the bar code located in the center
of the screen to which the scanner lens is facing.By default, this configuration is in a closed state.
Central Mode Off (Default)
Central Mode Turn On
- 26 -