Repeated Code Detection - 2connect 2C-WHS-26-2D User Manual

When the self-sensing mode is configured to be on, the scanner can automatically sense the
barcode in front of the lens for decoding.。

2.15 Repeated code detection

In induction mode, it is used to configure the interval time for solving the same barcode.If the
setup time is not exceeded, the same barcode will only be solved once.
Repeat Code Detection Interval 500s
Repeat Code Detection Interval 1s
Auto Sense Mode Off (Default)
Auto Sense Mode Turn On
Repeat Code Detection Interval 750s(Default)
- 25 -