System Setting; Mark Setting; Basic Barcode Setting; Pair Receiver - 2connect 2C-WHS-26-2D User Manual

This product is mainly used to set options and functions by reading a series of special
barcodes,in this chapter,we'll detail the options and features available to users and provide the
corresponding setup code.This method of setting up scanning is relatively straightforward and easy
to understand, and is convenient for the user to operate.

2.1 Mark setting

This is the mark for setting up the barcode function of the mode.The mark consists of
two parts:
1.Barcode section of setting code
2.Set the name of the option or function, such as the set function.

2.2 Basic barcode setting

2.2.1 Pair receiver

A: Press the button briefly to start the scanner, and the green indicator light will be on if
the scanner is started successfully
B: Scan the barcode below "enter pairing mode". After successfully entering pairing mode, the
Bluetooth indicator will flash

2.System Setting

Setting Mode
Enter Pairing Mode
- 11 -
1
2