Upload warehousing data by scanning the "Data Upload" barcode,barcodes stored in the
scanner after data upload are not automatically deleted.The user uploads the warehousing data
multiple times by scanning the "data upload".
Note: Please try to ensure that the wireless signal connection is good when uploading data,or
upload with the data cable connected.
Clear barcode data in the warehouse by scanning the "Clear Warehousing Data" barcode.After
the barcode is cleared, it will not be uploaded again. Please confirm whether the data has been
uploaded before clearing.
2.2.4 Initialization setting
If you accidentally scan other function setting codes during use, resulting in the scanning
function not working properly, you can restore the initialization status by scanning the initialization
bar code.
2.2.5 Read version information
Display Total Warehouse Entries
Data Upload
Clear Warehousing Data
Restore Factory Settings
- 13 -