Table of Contents
Advertisement
Quick Links
Assembly, operating, and maintenance instructions for
This manual contains the following documents:
•
Safety instructions and Machine specifications
Assembly instructions
•
Controls, Operation, and Maintenance
•
•
Wiring Diagram
Warranty information
•
Serial Number:
(Please log your machine's serial number and date of purchase for future reference.)
VDC-513610
Vastex Dri-Vault VDC-513610.
/
Date:____
____
Vastex International, Inc.
1032 N. Irving St.
/
______
Allentown, Pa. 18109 USA
Phone# 610 434-6004 Fax# 610 434-6607
Web Site www.vastex.com
E-Mail info@vastex.com
Pg. 1
Pg. 2
Pg. 3
Pg. 4
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for VASTEX VDC-513610
Summary of Contents for VASTEX VDC-513610
- Page 1 VDC-513610 Assembly, operating, and maintenance instructions for Vastex Dri-Vault VDC-513610. This manual contains the following documents: • Safety instructions and Machine specifications Pg. 1 Assembly instructions Pg. 2 • Controls, Operation, and Maintenance Pg. 3 • • Wiring Diagram Pg. 4 Warranty information •...
- Page 2 • VASTEX Screen Drying Cabinet is intended for the drying of emulsion on screen printing screens. Do not use for any other purpose unless authorized by Vastex International, Inc. Use of this equipment for any other purpose can be dangerous and may cause damage to this equipment voiding the warranty.
- Page 3 Assembly 1) Unpack your drying cabinet and remove the (4) lag screws (with a 7/16 socket) holding it down to the skid. Open the doors and remove the wrapped Shelves, the Center Tree, and any other items inside. 2) Slide the drying cabinet off the skid and install the (4) casters at each corner of the machine. You may need another person to help install the casters while one lifts the cabinet.
- Page 4 A breaker/switch is used to turn the machine on and off. In the event of a short or electrical failure, the switch will trip into the middle position. If the breaker will not reset, or it trips often, contact Vastex tech support or a li- censed electrician.
- Page 6 Vastex International, Inc. If the equipment in question is less than one (1) year old, it will be shipped to the customer at no charge, with an RGA issued by Vastex for the defective part. The defective part must be shipped back to Vastex freight prepaid within 30 days or the account will be billed.
- Page 7 Your new Vastex equipment is protected against *manufacturers’ defects by our warranty, completely explained in doc# 01-00-017 for the V2000-HD series manual printer and in doc# 01-00-005 for all other Vastex manufactured equipment. Please refer to these documents for the **warranty term and specific concerns about the warranty.
- Page 8 14. All notices required by this contract to be given by either party shall be sent in writing or by facsimile and shall be addressed to the last known address of such other party. Notices shall be deemed to have been received on the fifth business day following deposit in the mail. M:\Vastex\01-Manuals & Doc\00-misc\01-00-015 TERMS&CONDITIONS.wpd...
Need help?
Do you have a question about the VDC-513610 and is the answer not in the manual?
Questions and answers