Specifications - Makita DTS131 Instruction Manual

SPECIFICATIONS

Capacities
No load speed
Impacts per minute
Rated voltage
Overall length
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Only for EU countries
Ni-MH
Li-ion Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Model
Machine screw
Standard bolt
Impact mode (Hard)
Impact mode (Medium)
Impact mode (Soft)
T mode
Impact mode (Hard)
Impact mode (Medium)
Impact mode (Soft)
T mode
Net weight
D.C.14.4 V Model
D.C.18 V Model
DTS131
4 mm - 8 mm
5 mm - 8 mm
-1
0 - 3,000 min
-1
0 - 2,000 min
-1
0 - 1,200 min
-1
0 - 1,200 min
-1
0 - 2,500 min
-1
0 - 2,200 min
-1
0 - 1,400 min
-1
0 - 1,400 min
D.C. 14.4 V
136 mm
1.2 - 1.4 kg
BL1415N / BL1430 / BL1430B / BL1440 / BL1450 / BL1460B
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF
Intended use
The tool is intended for screw driving in wood, metal
and plastic.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841:
(In soft impact force grade)
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
2 ENGLISH
DTS141
4 mm - 8 mm
5 mm - 8 mm
-1
0 - 3,200 min
-1
0 - 2,000 min
-1
0 - 1,200 min
-1
0 - 1,200 min
-1
0 - 2,700 min
-1
0 - 2,200 min
-1
0 - 1,400 min
-1
0 - 1,400 min
D.C. 18 V
136 mm
1.3 - 1.6 kg
) : 77 dB (A)
pA